Inserting The Carbon Filters For Circulating Air Mode - Hanseatic SY-103D3-E3-C9-600 Manuel D'instructions

Installation
The carbon filter (odour filter) is filled with activated carbon that reduces the

Inserting the carbon filters for circulating air mode

kitchen vapours during cooking. If used regularly, these filters should be replaced
approximately every three months (see "Care and maintenance" – Carbon filters,
page 16).
1. Open the glass panel of the extracting hood.
2. Push the lock on the grease filter 1a to the left and remove the grease
filter carefully downwards.
3. Install the carbon filters 1b on the right and left of the motor as shown
on the right and tighten fully.
4. Insert the grease filter 1a into the recess on the left.
5. Push the lock to the left, press the grease filter 1a into place on the right
and release the lock. The grease filter 1a clicks into place.
1a
1a
Preparation
1b
13
English