ENGLISH
• To avoid the risk of electric shock, do not
immerse the cord, plug or motor unit in
water or other liquid.
• Check that the supply voltage shown on
the rating plate of the appliance matches
that of your electrical system. Any
connection error will invalidate the
guarantee.
Mains plug replacement
If a new mains plug needs to be fitted:
• Safely dispose of the old plug
• Connect the brown lead to the live
terminal of the new plug
• Connect the blue lead to the neutral
terminal
• If the product is class I (earthed),
connect the green/yellow lead to the
earth terminal.
Warning! If your product is class II double
insulated (only 2 wires in the cord set), no
connection is to be made to the earth
terminal
• Follow the fitting instructions supplied
with good quality plugs
• Any replacement fuse must be of the
same rating as the original fuse supplied
with the product.
Warning! The above section on mains plug
replacement is for authorized service centre
personnel.
Assembly
Wash all detachable parts (see
chapter 'Maintenance and
cleaning').
Assembling the food processor
1. Fit the food processor bowl (H) onto the
food processor base (I), secure it by
turning it clockwise.
6
All manuals and user guides at all-guides.com
2. For chopping or kneading fit the
3. For shredding or slicing, fit the required
4. Place the assembled blade / cutter disc
5. Fit the food processor lid (C) and secure
6. Fit the inner pusher (B) into the pusher
Assembling the blender
1. Place the blender jug (Q) onto the food
2. Fit the blender lid (R) to the blender jar
3. Fit the filler cap (S) to the blender lid (R)
Assembling the grinder
1. Fit the grinder jug seal (N) into the
2. Fit the grinder blade (M) into the grinder
3. Place the grinder jar onto the food
Assembling the citrus Juicer
1. Fit the food processor jug (H) onto the
2. Fit the citrus juicer (P) onto the food
required blade (E or F) onto the blade
holder (G).
blade (D1, D2, D3, D4 or D5) into the
cutter disc (D).
into the food processor jug (H).
it by turning it clockwise
(A), then place the assembly into the
hole in the lid (C)
processor base (I) and secure it by
turning clockwise.
(Q) and secure it by turning it
anti-clockwise.
and secure it by turning it clockwise.
grinder blade (M).
jar (0) and secure by turning it clockwise
processor base (I) and secure it by
turning it clockwise
food processor base (I), and secure it by
turning it clockwise
processor jug (H), and secure it by
turning it clockwise.