Publicité
Les langues disponibles
Les langues disponibles
U S I N G T H E K E T T L E
C OR DLE S S MODE L
1.
Fill the kettle with at least
enough water to cover the
element, marked by MIN inside
the kettle and outside at the
water guage. Don't overfill it,
marked by MAX inside the
kettle and outside on the water
guage.
2.
Don't forget to close the lid
after filling.
3.
Take the kettle to the base
unit, hold the kettle level, then
gently but firmly - push the
handle end down to engage the
base unit connector. Plug in and
switch on the wall socket.
4.
Operate the switch lever to
on / I
and the neon light will go on.
5.
When the water boils, the
kettle will switch off automati-
cally. As it does so, a drop of
water may emerge from the vent
in the base of the kettle control
housing. This is normal and not
a fault.
6.
Important: Ensure that the
kettle has switched off automati-
cally, or is switched off manually,
operating the switch lever to
O position, before attempting to
remove the kettle from the base
unit.
7.
To remove the kettle from
the base unit, switch off at the
wall socket, grasp the handle and
hold the kettle level while lifting
it clear of the base unit. Take
extra care if the kettle is filled to
MAX.
8.
If you do not put in enough
water, or if you switch on the
kettle when it is empty, the
safety cut-out will switch off the
power automatically. If this
happens, remove the cord and
leave the kettle to stand for the
element to cool down naturally,
then refill and use the kettle as
normal.
I
M P O R T A N T :
THE KETTLE MUST ONLY
BE USED WITH THE BASE
UNIT PROVIDED AND IS
NOT TO BE FILLED WHEN
PLACED ON THE BASE
UNIT.
W
A R N I N G :
DO NOT PLACE THE BASE
UNIT ONTO A METAL
TRAY OR METAL SURFACE
WHILST IN USE.
I
MPORTANT:
ON CORDLESS MODELS
IF THE MAINS LEAD
BECOMES DAMAGED
RETURN BASE TO
SERVICE AGENT FOR
REPAIR.
S C A L E F I L T E R
S
cale is a natural substance
which forms when water from
hard water areas is boiled.
The filter is designed to retain
the scale in the kettle.
F I L T E R C L E A N I N G
A N D R E M O V A L
I
t is important that the filter is
cleaned regularly. The filter is a
"snap fit" to the lid. The filter
may be removed from the lid by
pulling it downwards from the
lid. It may be cleaned by brush-
ing gently with a soft brush under
running water.
D E - S C A L I N G
I
n some areas, scale may form
on the element which could
damage it.
S
oft scale may be removed by
brushing the cool element
regularly.
R
emove hard scale using either
a proprietary de-scaling product
suitable for plastic kettles (follow-
ing the instructions carefully), or
citric acid. We recommend
using citric acid as follows:
B
oil 1 litre of water, then un-
plug the kettle and stand it in an
empty sink or bowl. Add 50gm
of citric acid crystals gradually,
then leave the kettle to stand.
A
s soon as the effervescence
subsides, empty the kettle and
rinse it thoroughly with cold
water.
W
ipe the outside of the kettle
thoroughly with a damp cloth to
remove all traces of citric acid
which may damage the finish.
Publicité
