Altana byko-spectra pro Manuel D'instructions page 7

BYK-Gardner GmbH
3 Luminaire Assembly
Visual color evaluations can also be performed with a luminaire set up in a designated
„color evaluation area".
Suspend the luminaire with snap hooks (and chains) over the work area.
Place diffuser pins in brackets, side with complete hinge pins facing towards lamps. Snap
diffuser latch.
Connect several luminaires in a chain with cascade cables (refer to full manual for detailed
settings). Ready to plug in and turn on!
Setup Recommendations
Please see SAE J361 for set-up of designated „color evaluation area".
Keep 30 cm distance to wall/ceiling or next luminaire.
Each luminaire needs adequate support, at least 50 kg.
Provide 1150 W per luminaire and follow local electrical regulations.
301 300 039 - 2303
byko-spectra pro
7