Altana byko-spectra pro Manuel D'instructions page 6

byko-spectra pro
2 Light Booth Assembly
1
Fix rear panel on base plate with hand
screws.
3
Turn around booth and screw side
panels to base plate.
5
In order to position luminaire, support
from a second person is needed. Fit
luminaire in cones and fix with screws.
Ready to plug in and turn on! The power switch I/O is on the left side - below the dis-
play.
6
BYK-Gardner GmbH
2
Hold side panels with folding inwards.
Insert into guide rail of rear panel. Fix
with screws.
4
Place brackets of front panel in pins.
Tilt up panel and fix.
6
Place diffuser pins in brackets, side
with complete hinge pins facing to-
wards lamps. Snap diffuser latch.
301 300 039 - 2303