Grandstream Networks GXV3175 Guide De Démarrage Rapide page 4

PHONE SETUP:
Installing The Phone (Wall Mount):
1. Attach the wall mount to the slot on the back of the phone;
2. Attach the phone to the wall via the wall mount hole;
3. Pull out the tab on from the handset cradle. (See Figure below)
4. Rotate the tab and plug it back into the slot with the extension up to hold the
handset while the phone is mounted on the wall. (See Figure below)
3
All manuals and user guides at all-guides.com
Slots for the
wall mount and
phone stand
Handset Rest
Tab with extension up
Tab with extension down
Installing The Phone (Phone Stand):
For installing the phone on the table with the phone stand, attach the phone stand
to the bottom of the phone where there is a slot for the phone stand.
CONNECTING THE PHONE:
PC Port
LAN Port
Power
To setup the GXV3175, follow the steps below:
1. Connect the handset and main phone case with the phone cord;
2. Connect the LAN port of the phone to the RJ-45 socket of a hub/switch or a
router (LAN side of the router) using the Ethernet cable;
3. Connect the 12V DC output plug to the power jack on the phone; plug the power
adapter into an electrical outlet;
4. The LCD will display booting up or firmware upgrading information. Before con-
tinuing, please wait for the main screen display to show up;
5. Using the web configuration interface or from the menu of the touch screen, you
can further configure network connection using either static IP or DHCP.
The GXV3175 supports configuration-free Plug-and-Call through Grandstream's
peer to peer SIP technology. After the phone obtains IP address and successfully
registers to IPVideo Talk network, the phone is ready for making video calls over
the IPVideo Talk network.
Handset Port
4