Scale House DHS Serie Notice De L'utilisateur page 13

All manuals and user guides at all-guides.com
If weight is tared, or not stable, zero is not allowed.
If weight is within the configured percentage (see section 6) of
F.S., zero is not allowed.
This operation is generally made when the hook is empty.
The scale also has an automatic zero at start-up to eliminate any
eventual weight residues on the hook. In any case it may be
necessary to press again ZERO/TARE if small weight quantities
remain displayed (with empty hook).
5.5 TARE
Clear the scale with ZERO/TARE at length if necessary. The
relative indicator on the display turns on.
Put the container on the hook; the relative weight will be shown
on the display.
Press TARE/ZERO to store weight as tare, when there's no tare
stored.
Zero the scale. ZERO is shown.
Weight reading turns "0.0" or "0.00".
The relative indicator on the
display turns on.
TARE is shown.
Weight reading turns "0.0" or "0.00".
The weight which was displayed is
stored as a tare, the display shows
zero.
The tare indicator on the display will
turn on.
11