Publicité
Les langues disponibles
Les langues disponibles
WARNING
!
•
Ensure the house circuit breakers for the circuit supply are turned on. When initially connecting the appliance to
a power source, the appliance will make a beeping sound to indicate standby mode.
Once the appliance has been plugged into a grounded electrical outlet or hard-wired to a dedicated
6.1
operating control panel
Power
Temperature
Control
Heater
Flame
ECO Mode
Indicating Light
Boost Mode
Indicating Light
120V power supply, it is ready to operate.
Turns the appliance on / off.
Controls the appliance temperature.
11 Settings:
°C
18
19
20
21
°F
64
66
68
70
NOTE: When setting is °C or °F, the temperature control is OFF. Holding the button
for 5s will switch the temperature from °C to °F and vice versa.
Turns the heater and blower on / off.
3 Settings:
H0 - Heater and blower off
FAN - Blower on
H-1 - Heater on
NOTE: Heater function can be disabled / enabled by holding the button for 5s.
When the heater function is disabled, "LOC" will be displayed. The blower has a 10
second delay after the heater is off to blow out the residual heat.
Turns the fl ame effect on / off.
2 Settings:
F-1 - Flame effect on (blue and orange, brightest fl ames)
F-0 - Flame effect off
Indicates the appliance is working under ECO mode (energy saving).
Indicates the appliance is working under Boost mode (heat boost).
6.0 operating instructions
22
23
24
25
26
72
74
76
78
80
27
82
17
W415-2971 / B / 08.19.21
EN
Publicité
