Publicité
Les langues disponibles
Les langues disponibles
Notice:
1. The room humidity display range is 30~90%RH (room humidity ≤ 30%, display 30%; room humidity ≥ 90%,
display 90%). The working environment temperature of this appliance is 5~32 ℃ , and the working
environment humidity is 10~95%RH.
2. The compressor has a three-minute delay protection function. When the compressor is working and the
power is cut off accidentally, the compressor will not restart immediately after turned on again. It will start
to work in 3 minutes.
DRAIN THE COLLECTED WATER
When the water tank is full, the water tank full indicator light will illuminate. The digital display will flash "FL".
The operation will stop automatically and the buzzer will beep 5 times to alert the user that the water needs to
be emptied from the water tank.
Empty the water tank
1. Draw out the water tank gently by holding the concave part at the both sides.
2. Discard the collected water, through the drain hole (B).
3. Install the water tank back by pushing it horizontally and gently. The handle of the water tank cover should
lie down.
Continuous water drainage
Plug the provided plastic pipe to the continuous drainage outlet, and the condensed water will be continuously
drained out through this outlet instead of collection in the water tank. Make sure the pipe is installed at a
downhill way to let the water continuously flow out.
- 10 -
Publicité
