Télécharger Imprimer la page

emerio DH-129238 Mode D'emploi page 10

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 41
3. Clothes drying mode: the indicator light of "DRY" illuminates. The compressor keeps running continuously.
The fan speed cannot be adjusted and the unit works at high fan speed by default. The humidity cannot be
set and the room humidity (30~90%RH) is shown on the digital display.
Note: To turn off the appliance under the dehumidification mode or clothes drying mode, the fan motor will be
turned off after a delay of 1 minute.
Increasing/decreasing setting buttons
1. Press the button "
setting of humidity or timer.
2. When the room humidity > 65%RH, users can press and hold the button "
mold removal function (dry inside function). The indicator light of "DRY INSIDE" will be on. This function is
only available for dehumidification mode and clothes drying mode. Press and hold this button for 3 seconds
again to turn off the function.
Note: If this function has been selected and the appliance is turned off later, the fan motor will be turned off
after a delay of 5 minutes.
3. Press the buttons "
The display will last for approx. 10 seconds.
Fan speed button
1. Press the fan speed button to select low or high fan speed. The corresponding indicator light will illuminate.
2. Press and hold the fan speed button for three seconds to turn off or turn on the indication display. When the
indication display is turned off, the control panel will dim in 5 seconds if no further operations.
Timer button
Timer ON setting:
When the appliance is standby, press the button "TIMER", the corresponding indicator light of "TIMER"
-
will illuminate.
Press the button "
-
digital display and the setting will be in effect in approx. 5 seconds.
The appliance will automatically turn on once the set time has passed.
-
Timer OFF setting:
When the appliance is working, press the button "TIMER", the corresponding indicator light of "TIMER"
-
will illuminate.
Press the button "
-
digital display and the setting will be in effect in approx. 5 seconds. The digital display will turn back to
show the humidity.
The appliance will automatically turn off once the set time has passed.
-
Note: Press the button "TIMER" again to check the remaining time. Continue to press the button "TIMER", the
timer function will be cancelled.
Child lock function
Press the timer button and the fan speed button at the same time to turn on the child lock function. The indicator
light of "LOCK" will illuminate and all buttons on the control panel will be invalid. Press the timer button and the
fan speed button at the same time again to turn off the child lock function.
Defrosting function
The appliance will enter the defrosting function automatically. The indicator light of "DEF." will be on and the
compressor will stop working. Once the defrosting is finished, the indicator light of "DEF." will be off and the
compressor will resume working.
" to increase the setting of humidity or timer. Press the button "
" and "
" at the same time to check the room temperature on the digital display.
"/"
" to select a desired ON time from 0-24 hours. The value will flash on the
"/"
" to select a desired OFF time from 0-24 hours. The value will flash on the
- 9 -
" to decrease the
" for 3 seconds to turn on the

Publicité

loading