Publicité
Les langues disponibles
Les langues disponibles
Menu
1. To enter menu, press OK
2. Short press the menu button
, or the down arrow button
up
and down
to exit selection.
3. To exit the menu, short press the menu button
4. Press OK
to start the recording again
Menu Options
1. Recording Setting (Page 1)
•
Resolution: 1080P FHD/ 720P/ VGA
•
Loop Recording: Off/1 Minute/3 Minute/5 Minutes
•
Wide Dynamic Range: Off/On
•
Exposure: +3/+2/+1/0/-1/-2/-3
•
Motion Detection: Off/On
•
Microphone: Off/On
•
Date Stamp: Off/on
•
G-Sensor: Off/ Low/ Medium/ High *When 1g=9.80m/s, the video will be saved
automatically
G-sensor can be selected by 2G-4G-6G-8G，the original mode is 4G.
•
Parking Guard: Off/ On
2. System Setting (Page 2)
•
Screen Saver: Off/30 Second/1 Minute/2 Minutes
•
Frequency: 50Hz/60Hz
•
Key Sound: Off/ On
•
Language: English/French/Chinese/Japanese
•
Date/ Time: Set up YYYY/MM/DD HH:MM:SS
•
Record Audio: Off/ On
•
Format: Cancel/OK
•
Default Setting: Cancel/OK
•
Version: shows the firmware version
Recording Mode
When red dot is blinking, it means dash cam is in the recording mode. In recording mode, you can:
•
Audio Recording (Default ON): Press down arrow button
recording. Press down arrow button
•
Lock Recording File: Dash cam records in loop. Older file will be overwritten later
when stored Press M
in a different folder and will not be deleted later.
•
Screen Off: Press power button
to turn the screen back on.
to stop the recording
, a sub menu will appear; short press the up arrow button
to navigate. Press the ok button
button to navigate selections. Press OK
or Lock Button to lock the file. The locked file will be saved
to select or menu button
again to exit.
again to unmute audio recording.
to turn off screen. Press power button
8
, to enter the setting. Use
to mute audio
again
Publicité
