myGEKOgear ORBIT 1120 Manuel D'utilisation Rapide page 10

USB mode
Connect the USB cable to a computer through a USB port, turn on the dash cam and it will
appear as a USB Disk: in this mode, you can access the video and photo files.
Battery
1. The power is shown as below：
Full
2. The dash cam can be charged via 3 ways, the red LED will be on when charging, which will last
180 minutes. And the red light will turn off when it's fully charged.
•
Using a power adapter
•
By USB cable
•
Charging with on-board power supply
Specifications
LCD Screen
Video Resolution
Lens
Languages
Photo Format
Video Format
G-sensor
Loop Recording
USB Interface
Working Temperature
Storage Temperature
Memory card
Power
Battery Capacity
Half Charge
3.0" TFT LCD screen
FHD 1920X1080 30fps / HD 1280X720 30fps
130 degree wide angle
English/Russian/Chinese/Korean/Japanese
JPEG
MOV / H.264
YES
YES
USB 2.0
0°C~60°C / 32°F~140°F
-10°C~70°C / 14°F~158°F
Micro SD card up to 64GB, Class 10 or above
5V/1.5A
Li-battery 200mAh
10
Low Empty