Publicité
Les langues disponibles
Les langues disponibles
Where to Install Your Dash Cam
Power On
Insert the car charger cable into the car's cigarette lighter and the other end into the Micro-USB
port on the device. Make sure to input the microSD Card into the microSD Card slot on device.
After turning on, the system will start recording automatically. The LED light will turn flashing
when recording mode has started.
*Reminder: Please format microSD card before you start recording.
Power Off
Hold down the power button at least 5 seconds to turn off device. To avoid breaking down the
last file recorded, do not eject the SD Card immediately after powering off.
If you need to turn it back on simply hold the power button for at least 4 seconds.
Settings:
1.
To have a better view, try to install at the top center of the windshield.
2. Make sure the lens is located in a place where the windshield wiper can
clean the window to ensure view is clear.
3.
Make sure the device is not installed in a place where it will interfere with the safety bag.
4.
Make sure the device will not be obstructed by the windshield's sun control film
(window tint).
5. Clean the area you desire to have the dash cam placed before sticking the device, and DO
NOT move the device for a 24-hour period.
How to Install Your Dash Cam
1. Insert a C10/U3 or higher, 8 GB or larger, MicroSD card. (32 GB MicroSD card included)
Notice:
•
Use a genuine high-speed SD card Class 10 (C10/U3) or higher, 8GB or above. Insufficient
card capacity or insufficient card speed will result in incompatibility or unstable recording.
When using a new card, please format the card in the menu and set the date and time
before use.
•
After the power is turned on, check whether the power indicator light is on. If the
indicator light is not on, first check whether the power cable is correctly plugged in.
2. Remove the protective film from the 3m tape on the bracket.
3. Affix the mount onto the desired location on the windshield.
4. Connect the power cord to the Mini-USB port of the Orbit 1120 and the 12V plug to the 12V
outlet port.
5. Carefully manage and run your wiring along the window trim.
6. Dash cam will automatically turn on once the ignition is on
6
6
Publicité
