Uline METRO Serie Instructions De Montage page 2

Figure 1
Figure 2
B
Figure 3
M
L
Figure 4
N
L
PAGE 2 OF 9
ASSEMBLY
A
1. Lock drawers. With second person, carefully set file
cabinet on back. (See Figure 1)
2. Insert adjustable glides (A) into bottom of file
cabinet. Glides can be adjusted to compensate
for uneven floors. (See Figure 1)
3. With second person, set file cabinet upright.
4. Unlock drawers. Remove handles (B) mounted inside
drawer and use same bolts (M4 x 34 mm) to attach
handles to front of drawer. Repeat for second drawer.
(See Figure 2)
5. To hang files from side to side, attach one file clip (L) to
each side of drawer and insert one long metal bar (M).
(See Figure 3)
6. To hang files from front to back, attach one file clip (L)
to front, and one to back end of drawer. Insert one
short metal bar (N). (See Figure 4)
STOP! For H-10307 Storage Credenza assembly,
refer to instructions included with H-10308
Storage Credenza Top/Frame.
NOTE: Assemble on a smooth, non-marring
surface to avoid scratching.
NOTE: Check that all parts are included.
1122 IH-10303