Publicité
Les langues disponibles
Les langues disponibles
System Info
NETWORK INTERFACE
Date and Time
Ethernet
Network
For Ethernet/WiFi configuration, access
the network settings menu using the
SIP
terminal touch screen
MAC ADDRESS
Voicemail
Maintenance
MODE
Diagnostics
Device
IP ADDRESS
NETMASK
GATEWAY
[NETMASK]
Indicate the subnet mask (if different from the default setting).
[GATEWAY]
Should it be necessary to route data traffic towards other subnets, you can indicate a gateway in the relevant space.
To save the changes or reload the previous data, press the button that appears at the bottom of the page.
Select the section called SIP from the list.
SIP
System Info
USERNAME
Date and Time
Network
PASSWORD
SIP
Voicemail
DISPLAY NAME
Maintenance
Diagnostics
SERVER
Device
SERVER TYPE
XIP Server
All manuals and user guides at all-guides.com
Network
Help
Exit
SIP
Help
Exit
Network
[PROGRAMMING INTERFACE]
Ethernet or WiFi
This shows the mode through which the device is connected to the
network. The mode can only be changed from the terminal.
[MAC ADDRESS]
The Mac address of the device cannot be changed.
[MODE]
Lets you choose the type of address from:
DHCP - The IP address of the device is assigned by the DHCP server.
Static - The IP address of the device is manually assigned.
[IP ADDRESS]
If you have chosen to use a static IP, enter the device's IP address in
this space. The address must belong to the same subnet as the router
and the other connected devices; the default address is "192.168.0.4".
[USERNAME]
In this space enter the "SIP Username" assigned to the device by
PCS Xip.
[PASSWORD] (absent by default)
In this space enter the password assigned in the Xip receiver credentials
in the server set-up window.
[NAME DISPLAYED] (option only available for systems without XIP
Servers):
In this space enter the name that you want to give to the device.
[SERVER]
In this space enter the server's IP address.
Default IP addresses of Xip servers:
ETI/MiniSER Xip, ETI/Domo Xip - 192.168.0.3 (port 0) -
192.168.1.3 (port 1)
ETI/SER Xip, 192.168.1.1
[SERVER TYPE]
Choose the type of server the device is connected to from:
[XIP Server] - Xip Server
[Generic]: non-Xip server
[None]: no server
To save the changes or reload the previous data, press the button that
Publicité
