Publicité
Les langues disponibles
Les langues disponibles
COMMISSIONING THE DEVICE
Access to Settings menu
Press the
icon on the bottom right of any page of the interface to access the list of parameters.
Note: Access to some of the following windows requires an administrator's password. This is set to 112233 by default.
System information
Device model
Serial number
HW version
SW version
APP version
Network
MAC address
Mode
IP address
Netmask
Gateway
[IP address]
If you have chosen to use a static IP, enter the device's IP address in this space. The address must belong to the same subnet
as the router and the other connected devices; the default address is "192.168.0.4".
[Netmask]
Indicate the subnet mask (if different from the default setting).
[Gateway]
Should it be necessary to route data traffic towards other subnets, you can indicate a gateway in the relevant space.
Save the settings by pressing the [Save] button.
Press the [Back] button to go back to the list of parameters to set.
All manuals and user guides at all-guides.com
D13T10IP
0x0088003d
1.0
1.3.0rc4
1.3.7dev
00:1C:B2:80:00:44
DHCP
Static
Save
System information
This window gives technical information
that is useful for identifying the device's
characteristics and the hardware and
software versions.
Network
Note: The screen shown in the figure
appears on devices which do not
have WiFi.
[Mode]
DHCP
The IP address of the de-
vice is assigned by the DHCP server.
Static
The IP address of the de-
vice is manually assigned.
Publicité
