Orbegozo PWO 1946 Manuel D'instructions page 10

PWO 1946- PWO 1952 - PWO 0936
Step 2 – To assemble the fan's head to the support bars, insert the screw
through the side of the support bars to the fan's head, according to the
picture of the right:
OPERATING INSTRUCTIONS
Step 1 - Set the fan base on a dry, level surface.
Step 2 - Please make sure the ON/Speed knob is in the off position. Plug cord into any
standard AC outlet.
Step 3 - The SPEED is adjusted by moving the knob left or right to the desired setting (LO-Low;
MED-Medium; HI-High; OFF)
Step 4 - The OSCILLATION switch is located in to the right of the speed control knob. To start
oscillation, move the switch to on. To stop oscillation move the switch back to OFF.
TILT ADJUSTEMENT
To change the tilting angle of the fan head, loosen the thumb bolts, move the fan head to the desired
angle and then re-tighten the thumb bolts.
Illustration
A) Control panel
B) Blade
C) Grill
D) Thumb bolts
E) Bar
FAN STORAGE
Your fan can be stored in the off-season either partially disassembled, we recommend using the
original (or appropriately sized) box. If stored assembled or partially assembled, remember to protect
the fan head form dust.
CLEANING AND MAINTENANCE
Use a damp cloth to clean the fan
•
Always unplug the fan before cleaning or disassembling.
•
All manuals and user guides at all-guides.com
10