Publicité
Les langues disponibles
Les langues disponibles
1
2
1. Drill Press Head
2. Table Assembly
3. Column
4. Light
5. Base
6. Chuck
7. Handle (3)
8. Spindle Adapter
9. Drift Key
10. 3 mm, 5 mm, 8 mm and 12mm Hex Wrench
11. Table Raising and Lowering Handle
12. Chuck Key
13. Hardware for fastening drill press to
a supporting surface. Includes: (3)
M8x1.25x125mm carriage head screws;
(4) flat washers; (2) lockwashers; and (2) hex
nuts
14. Worm gear
15. Flat washer
16. M10 x 1.5 x 40 mm Socket Head Cap
Screws (4)
17. Cord Clamp
18. Phillips head screw
19. Cord Bushing
20. M6 x 1 x 12 mm Hex Cap Head Screw (2)
21. 1/4" Washer
22. Cord Strain Relief
23. Cord Bushing
24. Screws (2)
25. Springs (2)
26. Forward tilt levers (2)
UNPACKINg AND CLEANINg
Carefully unpack the machine and all loose items from the shipping container(s). Remove the rust-preventative oil from
unpainted surfaces using a soft cloth moistened with mineral spirits, paint thinner or denatured alcohol.
FIRE HAZARD. Do not use highly volatile solvents such as gasoline, naphtha, acetone or lacquer thinner for cleaning
your machine. Such materials can easily catch fire.
After cleaning, cover the unpainted surfaces with a good quality household floor paste wax.
All manuals and user guides at all-guides.com
CARTON CONTENTS
3
4
5
6
7
8
9
10
14
15
16
24
25
26
7
11
12
13
17
18
19
20
21
22
23
Publicité
