Black & Decker CCS818 Mode D'emploi page 8

90560838 ccs818 chain saw.qxd: chainsaw booklet new
U
1
STAND ON
V
UPHILL
SIDE
WHEN
CUTTING
BECAUSE
LOG MAY
ROLL
X
60°
Z
All manuals and user guides at all-guides.com
2/12/10
1st CUT OVERBUCK (1/3
DIAMETER) TO AVOID
SPLINTERING
2
2nd CUT UNDERBUCK (2/3
DIAMETER) TO MEET 1st CUT
(TO AVOID PINCHING)
W
Y
.025 in.
.025"
.635mm
10:07 AM Page 8
Battery Cap Information
Battery storage and carrying caps (17) (figure A) are provided for
use whenever the battery is out of the tool or charger. Remove cap
before placing battery in charger or tool.
WARNING: Fire hazard. Do not store or carry battery so that
metal objects can contact exposed battery terminals. For
example, do not place battery in aprons, pockets, tool boxes, product
kit boxes, drawers, etc., with loose nails, screws, keys, etc.
Transporting batteries can possibly cause fires if the battery
terminals inadvertently come in contact with conductive
materials such as keys, coins, hand tools and the like. The US
Department of Transportation Hazardous Material Regulations
(HMR) actually prohibit transporting batteries in commerce or on
airplanes (i.e., packed in suitcases and carry-on luggage) UNLESS
they are properly protected from short circuits. So when transporting
individual batteries, make sure that the battery terminals are
protected and well insulated from materials that could contact them
and cause a short circuit.
SAFETY WARNINGS AND
INSTRUCTIONS
CHARGING
1. This manual contains important safety and operating
instructions.
2. Before using battery charger, read all instructions and cautionary
markings on (1) battery charger, (2) battery pack, and (3) product
using battery pack.
3. CAUTION: To reduce the risk of injury, charge only
Black & Decker Battery Packs. Other types of batteries may
burst causing personal injury and damage.
4. Do not expose charger to rain or snow.
5. Use of an attachment not recommended or sold by Black &
Decker may result in a risk of fire, electric shock, or injury to
persons.
8