Napoleon GPFS40 Manuel page 13

All manuals and user guides at all-guides.com
Finishing
Glass Ember Installation
WARNING!
Do not use the patio flame without the glass embers in place.
WARNING!
Glass embers may have sharp edges, wear safety glasses and gloves when handling.
Do not change or substitute the glass ember material provided with this appliance. If replacing, use
only replacement glass embers available from your local authorized dealer / distributor.
WARNING!
Glass embers may have a fine oil residue that needs to be cleaned prior to installation.
Clean the glass with mild dish soap, drain, rinse thoroughly and dry before installing.
1. Carefully pour the glass embers onto the appliance ember tray as shown.
2. Spread the glass embers over the tray and burner. The distribution of clear glass over the burner will
influence flame height.
3. The glass embers must cover the entire burner tray while ensuring no glass is placed on the ignition
portion of the burner as illustrated below.
ENSURE NO GLASS IS PLACED ON THE IGNITION PORTION OF THE BURNER,
DIFFICULTIES IN LIGHTING MAY RESULT.
13
EN
www.napoleongrills.com