All manuals and user guides at all-guides.com
DVD/Video CD/CD Correction
Play fails to start even
• This unit cannot play discs other than DVDs, Video CDs and CDs.
when PLAY is pressed...
• The disc may be dirty and require cleaning.
Play starts but then
stops
• Be sure disc is installed with label side up.
immediately...
Picture is distorted
during rapid advance or
• The picture will be somewhat distorted at times: this is normal.
rapid reverse...
No Forward/Reverse
• Some discs may have sections which prohibit Forward/Reverse search. (P.
search play...
23)
Play does not start even
• Confi rm the "DVD LOCK" setting. (P. 65)
when title is selected...
Audio soundtrack and/or
subtitle language is not
• If the audio soundtrack and/or subtitle language selected at DVD initial
the one selected at the
settings does not exist on the disc, it will not be accessible.
initial settings...
• Subtitles appear only when available on disc.
No subtitles...
• Select "ON" at the "Subtitle language" section (P. 50) to display subtitles.
Alternative audio
• Alternative language cannot be selected with discs which do not contain
soundtrack
more than one language.
(or subtitle) language
• For some discs, alternative language cannot be selected with the AUDIO or
cannot be selected...
SUB TITLE button. Try selecting it from the DVD MAIN MENU if available.
• This function is dependent on software availability. Even if disc has multiple
Angle cannot be
angles, they may be recorded for specifi c scenes only (ANGLE Indicator on
changed...
unit lights up). (P. 52)
Miscellaneous
Correction
Video cassette cannot
• Insert the cassette window side up; record tab facing you.
be inserted...
Video cassette cannot
• Completely insert Power Plug into an AC outlet.
be removed...
Eject does not function
or insertion cannot be
• Turn the POWER off and then on, and try ejecting or inserting the tape again.
done...
Video cassette ejects
when a recording is
• Make sure cassette record tab is intact. (P. 4)
started, or the power is
turned off for timer
recording...
• First, unplug unit. Then, prepare a rigid wire (e.g. an extended paper clip,
The disc cannot be
etc.) and, applying moderate force, insert it straight into the hole at the base
removed...
of the tray. The tray will eject a little. Now, pull the tray all the way out and
remove the disc. (P. 12)
In Stop mode, the VCR
• To enable Quick Play mechanism, the VCR cylinder will rotate for about 3
motor (CYLINDER)
minutes. This reduces response time from Stop to Play mode and from Play
continues to rotate..
to Rewind Search mode.
71