Panasonic Omnivision VHS PV-DF2003-K Manuel D'instructions page 17

All manuals and user guides at all-guides.com
* Important: If a remote control button does not work when pressed, press the
remote and try the button again.
Manual Clock Set
If AUTO CLOCK SET was incomplete, manually
set the clock as follows.
Press ACTION on the remote to display
1
SET CLOCK Menu screen.
SET CLOCK
DST : ON
SELE CT MONTH
SELECT :
SET : SET
END : ACT I ON
Press to select the month and press
2
SET to set. In the same manner, select
and set the date, year, time, and DST
(Daylight Saving Time).
THU
Press ACTION twice to start CLOCK and
3
exit.
Reset all unit Memory Functions
When moving unit to a new location, or if a mistake
was made in the Initial Setup section.
• Make sure a tape is not inserted in the unit.
1
Turn the unit Power
on.
2
Press and hold both PLAY and FF on the unit
for more than 5 seconds.
• The power will shut off.
• Please ignore "NO CASSETTE" warning.
3
Perform "Initial Setup" on page 16.
Note to CABLE system installer:
This re mind er is pro vid ed to call the CABLE
(Cable TV) System Installers at ten tion to Article
820-40 of the NEC that pro vides guide lines for
proper grounding and, in par tic u lar, specifi es
that the cable ground shall be con nect ed to the
ground ing system of the build ing, as close to
the point of cable entry as practical.
button on the
17