Dremel SM20 Consignes De Fonctionnement/Sécurité page 10

DM 2610013190 06-11:DM 2610013190 06-11.qxp 6/6/11 10:43 AM Page 10
STANDARD FLAT WHEEL ASSEMBLy
Disconnect the plug from
WARNING
the power source before
making any assembly, adjustments or
changing accessories. Such preventive safety
measures reduce the risk of starting the tool
accidentally.
1. Turn LOCK BOLT with wrench provided
clockwise and remove LOCK BOLT and
OUTER WASHER (Fig. 2). If the shaft
moves while attempting to loosen the lock
bolt press the spindle lock (Fig. 2).
2. Slide wheel behind the guard face and
mount it against the INNER WASHER on
the shaft (Fig. 2a).
SPINDLE LOCK
INNER
WASHER
STANDARD
FLAT WHEEL
All manuals and user guides at all-guides.com
Assembly
FIG. 2
OUTER WASHER
FIG. 2a
GUARD
FACE
STANDARD
WHEEL
-10-
3. Reinstall OUTER WASHER and tighten lock
bolt finger tight.
4. Press spindle lock to lock shaft and tighten
LOCK BOLT counter-clockwise until tight
with the wrench provided.
FLUSH CUTTING WHEEL ASSEMBLy
1. Repeat step 1 of above.
2. Place flush cutting wheel against the INNER
WASHER on the spindle shaft. (Fig. 2b).
3. Reinstall OUTER WASHER and tighten
LOCK BOLT finger tight.
4. Press spindle lock to lock shaft and tighten
LOCK BOLT counter-clockwise until tight
with the wrench provided.
GUARD FACE
FLUSH CUTTING WHEEL
(OPTIONAL)
LOCK
BOLT
FIG. 2b
FLUSH
CUTTING WHEEL
WRENCH