Qstarz Beyond Navigation BT-Q1200 Ultra Guide D'installation Rapide page 4

English
Utility V4 connecting GPS units other than BT‐Q1200Ultra would result in
software disconnection automatically.
NOTE 3: Qstarz Travel Recorder PC Utility V4 can't be opened with Qstarz Travel
Recorder PC Utility V3 simultaneously. Please execute either one of both
or the program may experience unstable status.
1. Click from <Start> / <All Programs> / <Qstarz Travel Recorder V4> / Travel
Recorder PC Utility V4
2. <File> \ <Read Log>
Download the log data from Travel Recorder.
2.1 Click <File> \ <Read Log> or the quick link icon.
2.2 Users have to input product key at the first time of use.
key is located on the cover of the driver CD.
2.3 PC Utility will automatically detect the com port and baud rate and load
in the GPS tracks.
2.4 A track list window will be popped up. Select the tracks to import and
tracks will be shown on the Google Map Window.
3. <File> \ <Clear Log>
Clear the data stored in the Travel Recorder.
4. <File> \ <Config GPS>
Configure the recording method of the flash memory of Travel Recorder.
4.1 Connection Setting
I. Auto Scan GPS Module (Recommended)
The program will automatically detect the com port. It is recommended to
set to auto scan.
II. Manual Setting
Users can also manually set the port. Please refer to users' manual for
more detail information.
4.2 GPS Log Setting
There are 4 log modes: General mode, vehicle mode, cycling mode, and
hiking mode. Users can also change the default setting of these 4
modes.
4
All manuals and user guides at all-guides.com
The product