DeWalt D51256 Manuel D'instructions page 20

All manuals and user guides at all-guides.com
E N G L I S H
NAILER D51256/D51275
Congratulations!
You have chosen a D WALT tool. Years of
E
experience, thorough product development and
innovation make D WALT one of the most reliable
E
partners for professional power tool users.
Technical data
D51256
Sound pressure (L ) dB(A) < 82
pA
Acoustic power (L ) dB(A) < 95
WA
Hand/arm weighted
vibration m/s 2 2.7
Recommended operating
pressure bar 4.9 - 8.3
Max. operating pressure bar 8.3
Air consumption per shot l 4.5
(at 6.9 bar) (at 6.9 bar)
Actuating mode contact
actuating actuating
Magazine angle 0°
Fasteners
length mm 32 - 65
shank diameter mm 1.6
(16 gauge) (15 gauge)
angle 0°
Weight kg 1.77
1)
This value is a tool-related characteristic value and
does not represent the influence to the hand-arm-
system when using the tool. The influence to the
hand-arm-system when using the tool will for example
depend on the gripping force, the contact pressure
force, the working direction, the adjustment of energy
supply, the workpiece and the workpiece support.
EC-Declaration of conformity
D51256/D51275
D WALT declares that these tools have been designed
E
in compliance with:
98/37/EC, EN 792-13, EN 12549, EN 12096
For more information, please contact D
address below, or refer to the back of the manual.
20
D51256.P65
Director Engineering and Product Development
Horst Großmann
D51275
< 82 D WALT, Richard-Klinger-Straße 40,
E
< 95 D-65510, Idstein, Germany
Safety instructions
2.7
When using tools, always observe the safety
4.9 - 8.3 regulations applicable in your country to reduce
8.3 the risk of personal injury. Read the following
6.0 safety instructions before attempting to operate
this product.
contact Keep these instructions in a safe place!
34° General
32 - 65 1 Keep work area clean
1.8 Cluttered areas and benches can cause accidents.
2 Consider work area environment
34° Do not expose tools to humidity. Keep work area
1.75 well lit. Do not use tools in the presence of
flammable liquids or gases.
3 Keep children away
Do not let children or visitors come into contact
with the tool. Supervision is required for those
under 16 years of age.
4 Store idle tools
When not in use, tools must be stored in a dry
place and locked up securely, out of reach of
children.
5 Dress properly
Do not wear loose clothing or jewellery. They can
be caught in moving parts. Preferably wear
rubber gloves and non-slip footwear when
working outdoors. Wear protective hair covering
to keep long hair out of the way.
6 Do not overreach
Keep proper footing and balance at all times.
7 Stay alert
WALT at the Watch what you are doing. Use common sense.
E
Do not operate the tool when you are tired.
20 28-12-2001, 09:21