Publicité
Les langues disponibles
Les langues disponibles
ANALOG/DIGITAL SETUP
Before starting the display setup, you
must complete the Analog/Digital setup.
1. Using a pen or other small object,
press the recessed
cycle through the following options.
SYSTEM SETTINGS
The Systems Settings screen is where the
controller's overall setting are defined for
both zones.
1. Press
to cycle to the
SYSTEM SETTING menu.
2. Press
to highlight the value you
want to change. Press
select the correct setting, then press
to confirm.
Value
Temperature unit
Power unit
Hour format
Time
Date
Reset
3. Repeat step 2 to set all values.
4. Press
to save the settings.
4
Hydrofarm.com
All manuals and user guides at all-guides.com
INSTRUCTIONS
button
to
SET
1
ANALOG SETUP:
Each zone can support a maximum of 50 LED or HID
analog (0-10V or 0-11.5V) fixtures.
DIGITAL SETUP:
Each zone can support a maximum of 256 HID digital
(RS-Protocol) fixtures.
ANALOG AND DIGITAL SETUP:
Zone A = Analog
Zone B = Digital
or
to
Options
F or C
% or W
12H or 24H mode
Hours/Minutes (AM/PM will adjust automatically)
Month/Day/Year
Resets to factory default settings
1
Publicité
