Publicité
Les langues disponibles
Les langues disponibles
5. Trucks come in many different configurations. Hitches are designed for use in light trucks such as the Ford F-Series,
the Chevy Silverado and the Dodge Ram. Long bed (8ft) light trucks are best for truck - trailer turning clearance.
Rule of thumb:
Fig. 4
6. The height of the coupler should be adjusted so the trailer is approximately level as it is towed. Allow
approximately 6 inches clearance between the top of the pickup walls and the underside of the front of the trailer for
pitch and roll of the trailer. (See Fig. 5). Allow more clearance between pickup walls and trailer for off road use.
Fig. 5
The measurements above are guidelines.
clearances. If vehicle and/or trailer has any added bed vicinity accessories (i.e. fairings, air dams, ground effects,
bed rails, etc.). Additional dimensioning and clearance checks have to be made.
©
2021 Horizon Global America Inc.
Product Instructions
Above Bed Gooseneck
The distance from the back of the truck cab to the center of the rear truck
axle ("X" in Fig. 4), should be approximately 4 inches greater than one-half
the trailer width ("Y" in Fig.4)
Truck
X
CAUTION:
If your measurements are close to these numbers re-check
RV Trailer
Gooseneck Hitch Ball
Approximately 6 Inches
Level Trailer
Page 7 of 27
30946N
Part Number:
30946
Y
09/10/2021
Rev. A
Publicité
