Publicité
Les langues disponibles
Les langues disponibles
5.
Due to variations in truck underbeds, it is normal for some handles to be loose and other handles to be too tight to lock. If a
handle appears too loose and rattles or cannot be closed fully, remove the lynch pin and adjust castle nut by hand to a
position where handle does not rattle or is able to close.
6.
Once handle adjustment is satisfactory, re-insert lynch pin.
7.
Verify that hitch is tight to truck bed by lifting each side of the hitch and the gooseball.
©
2021 Horizon Global America Inc.
Product Instructions
Above Bed Gooseneck
Lynch pin
(shown Closed)
Finger tighten castle nut only!
Page 4 of 27
30946N
09/10/2021
Part Number:
30946
Rev. A
Publicité
