Publicité
Liens rapides
VENUTO
®
Models/Modelos/Modèles
63070LF & 63970LF
Write purchased model number here.
Escriba aquí el número del modelo comprado.
Inscrivez le numéro de modèle ici.
You may need/Usted puede necesitar/Articles dont vous pouvez avoir besoin:
1/8"
For easy installation of your
Brizo
faucet you will need:
®
• To READ ALL the instructions completely
before beginning.
• To READ ALL warnings, care, and maintenance
information.
Para instalación fácil de su llave
Brizo
usted necesitará:
®
• LEER TODAS las instrucciones completamente
antes de empezar.
• LEER TODOS los avisos, cuidados, e
información de mantenimiento.
Pour installer votre robinet
Brizo
facilement, vous devez:
®
• LIRE TOUTES les instructions avant de débuter;
• LIRE TOUS les avertissements ainsi que toutes
les instructions de nettoyage et d'entretien;
To access additonal technical documents & product info, visit www.brizo.com/Your-Model-Number-Here
(example: www.brizo.com/9159T-DST)
Para acceder a documentos técnicos adicionales e información sobre el producto, visítenos en www.brizo.com/p/Your-Model-
Number-Here (ejemplo: www.brizo.com/9159T-DST)
Pour avoir accès à des documents techniques supplémentaires et à de l'information sur le produit, visitez www.brizo.com/Votre-
numéro-de-modèle-ci (exemple : www.brizo.com/9159T-DST)
www.brizo.com
HIGH-RISE PULL-DOWN KITCHEN
63056
AND BAR / PREP FAUCETS
LLAVES DE AGUA ELEVADAS,
DESLIZABLES HACIA ABAJO,
PARA COCINAS Y BARES / PREP
ROBINET À COL DE CYGNE ET
BEC-DOUCHETTE POUR ÉVIER
DE BAR OU D'ÎLOT DE CUISINE
1
?
www.brizo.com
1-877-345-BRIZO (2749)
brizosupport@brizo.com
10/22/2019
Rev. H
Publicité
Manuels Connexes pour Brizo VENUTO 63070LF
Sommaire des Matières pour Brizo VENUTO 63070LF
- Page 1 Para acceder a documentos técnicos adicionales e información sobre el producto, visítenos en www.brizo.com/p/Your-Model- 1-877-345-BRIZO (2749) Number-Here (ejemplo: www.brizo.com/9159T-DST) Pour avoir accès à des documents techniques supplémentaires et à de l’information sur le produit, visitez www.brizo.com/Votre- brizosupport@brizo.com numéro-de-modèle-ci (exemple : www.brizo.com/9159T-DST) 10/22/2019 Rev.
- Page 2 OPTIONAL Mount Faucet to Deck Optional Escutcheon Installation Remove adhesive backing on trim ring gasket (1) Install the mounting bracket (1) and nut (2) onto the mounting For optional installations using the 10" and press into place on trim ring (2). Slide trim ring shank (3) using wrench (4).
- Page 3 Hose Installation Turn spout opposite handle to aid hose installation. Feed hose (1) up through Press fit hose guide (1) into end of hose (2) as shown. Thread the spray head (3) onto the hose fitting (4) to prevent the hose from being pulled into the spout until spout (2).
- Page 4 Incorrect Installations. Instalacións incorrecta. Installations incorrecte. Push hose end (1) onto faucet outlet (2). Attach clip (3) over hoses as shown. Pull down moderately to ensure connection has been made. Deje pasar el extremo de la manguera (1) por la salida de la llave de agua / grifo (2). Conecte el gancho (3) sobre las mangueras como se muestra.
- Page 5 Custom Fit Connections Standard Connections Slide nut (1) over plastic sleeve (ferrule) (3). Start nut by hand NOTICE NOTICE onto supply valve connection (2) to prevent cross-threading. Turn nut until it feels snug. Then tighten nut at least 2 more To avoid risk of property damage, Follow If you determine the PEX supply tubing for this faucet is too turns with a wrench.
- Page 6 Correct method Incorrect Installation Instalación Incorrecta Método Correcto Installation Incorrecte Bonne méthode Do not install sleeve NOTICE Ensure cut is straight. upside down. Failure to use plastic sleeve (ferrule) in the correct orientation will result in disconnection and possible water damage. No instale la manga Asegúrese que el corte 1.
- Page 7 Turn on hot and cold water supplies (1). Pull the hose assembly (2) out of the spout and remove the sprayer (3). Be sure to hold the end of the hose down into Sprayer will lock into position when brought into proximity of the spout the sink and turn faucet handle (4) to the mixed position.
- Page 8 Maintenance Optional Temperature Indicator Ring: Remove cap (6) by rotating counterclockwise. Bonnet If faucet exhibits very low flow – If required, a red/blue indicator ring (9) can be A. Remove and clean aerator (1), or may be stiff due to O-ring, but should rotate by hand. installed under decorative cap.
- Page 9 Accessory Order Only Orden de Accesorio Solamente Livrable séparément seulement Soap Dispenser Installation - Accessory Order Only Separate head (1) from body assembly (2). Make sure gasket (3) is properly seated in the base of the body assembly. Insert body assembly through selected hole in sink. Secure body assembly to sink with nut (4).
- Page 10 63056 Rev. H...
- Page 11 63056 Rev. H...
- Page 12 BRIZO KITCHEN & BATH COMPANY SHALL NOT BE LIABLE FOR ANY DAMAGE TO THE FAUCET RE- by this warranty. Brizo Kitchen & Bath Company shall not be liable for any damage to the product resulting from SULTING FROM REASONABLE WEAR AND TEAR, OUTDOOR USE, MISUSE (INCLUDING USE OF THE...