Publicité
Les langues disponibles
Les langues disponibles
1.3 Caring for the environment
>
Pay special attention to correct disposal procedure
for all the packaging materials.
>
The appliance must not be disposed of with urban
waste. Contact local waste disposal centers for on
how to dispose of recyclable waste.
>
Prior to disposal, cut the power supply cord and
remove the door.
>
During disposal, avoid damage to the refrigeration
circuit.
>
The appliance does not contain hazardous
substances for the atmospheric ozone layer, neither
in the refrigeration circuit nor in the insulation.
2.1 Installation
Make sure that installation is performed correctly,
adhering to all of the instructions in the specific
installation guide provided with the appliance.
2.2 Connection to electrical power
supply
The appliance operates at 115 V AC, 60 Hz and
is equipped with a power supply cord with a
3-prong grounded plug, which must be connected
to a corresponding 3-prong (15 Amp) grounding-
type wall receptacle.
Do not use extension cords and/or
multiple adapters for connection.
2. INSTALLATION
3.1 Know your appliance
Congratulations for having purchased your new
appliance: from now on you can use our innovative
conservation system, which will allow you to keep
wine in the best way possible.
This manual will answer most of your questions
about the product's features. Should you require
further information, please
>
call us 1-855-4FULGOR (1-855-438-5467)
>
visit fulgor-milano.com/us/en/assistance
Before calling, write down the model
code and serial number which are
available with the manuals and on the
rating plate located on the bottom left-
hand corner of the appliance, behind the
bottom drawer.
Before calling, please make sure to have the
following information ready:
- Date of Purchase;
- Name of dealer where product was purchased.
2.4 Refrigerant
The refrigerant isobutane (R600a) is contained
within the refrigerant circuit of the appliance, a
natural gas with a high level of environmental
compatibility, which is nevertheless flammable.
>
During transportation and installation of the
appliance, be certain that none of the components
of the refrigerant circuit become damaged.
>
If the refrigerant circuit should become damaged:
– avoid open flames and sources of ignition;
– thoroughly ventilate the room in which the
appliance is situated.
EN
EN
7
Publicité
