Outsunny AB1-011 Instructions D'assemblage page 4

Step 5:
Fix the steel pegs by hammer in the eyelet holes
at each and every corner of the tent to the ground.
Folds away
Step 1:
Remove the steel pegs at all the corers and tie down
ropes from all around the tent. Remove the attached
ground sheet to the tent.
Step 3:
Firmly push down on the centre hub(s) of the
roof with palm of your hand until the roof
flattens down onto the sides.
Step 5:
Lay the ollapsed tent down and use the straps to
hold all of the sides in as close as possible.
05
Step 6:
Fix the steel pegs on the ground and tie all the
ropes around the tent to secure from the strong
wind. Attach the provided ground sheet inside the
tent.
01
Step 2:
Push in firmly on one of the center hubs of
outside walls until it collapses inward. Contiune
around the outside of the tent collapsing all of
the remaining walls until the unit lays flat.
03
Step 4:
Once the unit is laying flat, lift each of the corners
together and stand the folded unit with all of the
hubs facing down.
05
Step 6:
Place the tent into the bag hubs first and tuck all
materials in so that the zipper can be closed.
06
02
04
06