Outsunny A20-123 Instructions

Open Directions
1. To pitch the tent, remove it from
the carry bag and undo the straps.
Storage steps:
1. Pull out the ground nails in turn,
remove the windbreak, and remove
the external tent.
TENT INSTRUCTIONS
2. Drop the leg poles down and hold
up the central hub then fold the legs
over.
2. Find two symmetrical poles, hold
the poles and stays together and lift
them up.
3.Extend the legs until you hear a
click, check that the silver pin is
located in the hole on the pole.
Repeat this for all four legs. Stake
four corners to the ground. Attach
guy lines then adjust sliders.
3. Press down, close the bracket at
the top of the cage, find the joint of
the pole, pull it out with both hands,
and fold it in the middle in turn.
4. Fix the nails, pull the windproof
rope, build the tent, and remember
to tie the wind rope
4. After folding the tent, roll up the
tent cloth, lay it flat, bundle it up,
sort out the accessories and put
them into the packaging bag.
EN
A20-123
C000000