Publicité
Les langues disponibles
Les langues disponibles
11. Checking the sealing result
It is important to check the result of the sealing regularly to ensure that the bags are hermetically
sealed. Severe wear and tear on the sealing bars or damage to them can adversely affect the
result.
The foil has not melted together.
12. Checking the safety device
It is important to check the crush guard on a weekly basis.
Press on the foot pedal and hold an object of 10–20 mm thickness between the sealing bars. The
sealing bars should stop and return to their starting position when they encounter resistance more than
8 mm in thickness.
Check annually whether the stickers on the funnel are damaged. Contact the manufacturer if they need
to be replaced.
13. Troubleshooting
Always state the serial number when contacting the distributor/manufacturer.
It is found on the back of the machine.
When ordering, a newly repaired plug-in unit is sent with
replacement instructions, and the defective plug-in unit should
be returned in the same box. The plug-in units are repaired and
delivered in tailor-made boxes.
Spare part list:
543WS
Plug-in unit
543WM Plug-in unit with battery
5410
Funnel, wide
Paxxo AB, Bjurögatan 35, SE-211 24 Malmö, Sweden • Tel : +46 (0) 40 18 60 25 • www.paxxo.com
Correct sealing joint.
Flat and even sealing joint.
5424
Power adaptor
5910
Power cable
5426
Batttery charger
Holes in the foil, uneven sealing
joint.
5428
Battery pack
5524
Knobs
5602
Foot pedal
5557
Wingnuts for legs (4 pcs)
14
Publicité
