Publicité
Les langues disponibles
Les langues disponibles
6. Unpacking/Putting into operation
The machine is delivered mounted, in a box. The stand has to be set to the desired height; the
foot pedal and cable have to be connected. The packing must then be recycled.
1
•
Remove all components from their packaging.
•
Check that all components are present; see pictures 1–6.
The power adaptor (3) is only included in the stationary model and the battery charger
(4) is only included in the mobile model.
•
Set the stand (1) to the desired height using the four screws and nuts (2). Connect the
power adaptor (3) or battery charger (4) to an electrical outlet with the same
specification as indicated on the label of the power adaptor or battery charger.
N.B.:
The picture is only an example. The sign may vary depending on the country
where the machine is used.
•
Fit the foot pedal (6) to the front panel, cut the air hose to the desired length.
•
Turn on the switch.
N.B.:
The machine takes approx. 5 seconds to start up.
•
Press the foot pedal and check that the foil is feeding down on both sides and it is
being sealed.
•
Check the sealing result against the pictures in Section 11.
•
The machine is now ready to use.
Paxxo AB, Bjurögatan 35, SE-211 24 Malmö, Sweden • Tel : +46 (0) 40 18 60 25 • www.paxxo.com
11
Publicité
