Publicité
Les langues disponibles
Les langues disponibles
7. Replacement of foil cassette
To signal the end of the foil cassette and that it is time to replace it, a red
last 2 metres of the foil.
Only the original foil cassette from PAXXO, item number
10880
, is to be used.
Any other types of foil might ignite and start a fire. It is
important to use the right type of foil cassette as
functionality cannot otherwise be guaranteed.
•
Turn off the switch.
•
Open the cover and place the foil cassette around the funnel and cut the ribbons (1).
Pull the foil from the outside (2).
1
•
Pull the foil down and make sure that the feeding wheels grip the foil (3).
3
•
Turn on the switch and wait approx. 5 seconds.
•
Press the foot pedal and check that the foil is fed down on both sides and is being sealed.
•
Close the cover.
•
Check the sealing result against the pictures in Section 11.
•
The machine is now ready to use.
Paxxo AB, Bjurögatan 35, SE-211 24 Malmö, Sweden • Tel : +46 (0) 40 18 60 25 • www.paxxo.com
STOP
is printed on the
2
12
Publicité
