Illumination; Knob Illumination Brightness Setting; Cpu Operation Stopped Status Display; Open Settings Menu 3 - Esoteric C1X Mode D'emploi

MENU 2 (continued)

Illumination

Light>***
How the rings around the INPUT and VOLUME knobs light can be set.
o By default, the setting is AUTO.
AUTO
When the knobs are operated, their rings light.
ON
The rings around the knobs are always lit.
OFF
The rings around the knobs are always unlit.

Knob illumination brightness setting

LightV>***
The brightness of the illumination around the knobs can be set.
o By default, the setting is 5.
5 (normal brightness)
c
4
c
3
c
2
c
1 (dim)
22

CPU operation stopped status display

CPUdp>***
o By default, the setting is ON.
OFF
CPU operation stopped status will not be shown.
ON
"CPU off" will be shown when operation of the CPU that controls
this product stops. When the input knob, volume knob or remote
control is operated, operation will resume to control the product.
When done, it will automatically stop operating again.
o If the APS function is not set to OFF, in order to check the
operation status and measure the time, the CPU will not enter
operation stopped mode.
o When DPaOFF is set to ON, the CPU will not enter operation
stopped mode while the time is being measured until the dis-
play is turned off automatically.
o When the RS232C external control setting is ON, the CPU will
not enter operation stopped mode because it is waiting to
receive external control.

Open Settings Menu 3

goto MENU3
Press and hold the SETUP button to open MENU 3.