Menu 2; Volume Mode; Fade-In/Out Time; Automatic Display Darkening Setting - Esoteric C1X Mode D'emploi

MENU 2

Volume mode

VolM>***
This sets how the volume is adjusted.
o By default, the setting is dB1.
o +12 dB using the dB1 setting is the same volume as 0.0 dB using
the dB2–dB4 settings.
STEP
Volume adjustment is shown as a value from 0.0 to 99.9.
dB1
The volume can be set to −∞ or from −99.9 to +12.0 dB and is
shown in dB units.
dB2
The volume can be set to −∞ or from −99.9 to 0.0 dB and is shown in
dB units.
dB3
The volume can be set to −∞ or from −79.9 to 0.0 dB and is shown in
dB units.
dB4
The volume can be set to −∞ or from −59.9 to 0.0 dB and is shown in
dB units.

Fade-in/out time

Fade>***
The fade-in/out time used when muting and unmuting becomes
longer in order from TM1 to TM3.
o By default, the setting is TM2.

Automatic display darkening setting

DPaOFF>***
Use this to set the display to darken automatically.
o By default, the setting is OFF.
ON
If no operation is conducted for ten minutes, the display automati-
cally turns off.
DIM
If no operation is conducted for ten minutes, the display will dim
to DIMMER 1 brightness.
OFF
Automatic display darkening will not occur.
o If the display is left on with the same indication for a long time,
brightness irregularities can occur. For this reason, we recommend
that you set the automatic display darkening function to ON.

Automatic power saving function

APS>***
If there is no audio input (continuous silence) from the selected input
source for the set amount of time, the unit will enter standby mode
automatically.
o By default, the setting is OFF.
o Audio input from input sources other than the one selected has no
effect on the operation of the automatic power saving function.
30m
30 minutes
60m
60 minutes
90m
90 minutes
120m
120 minutes
OFF
The automatic power saving function is disabled.
21