Publicité
Les langues disponibles
Les langues disponibles
8. OPERATION
• Select the speed required for the record you want to play.
• Put the record on the platter. Use the puck if needed (e.g. for singles).
• Remove the the stylus cover and release the tonearm.
• Press the START/STOP-button and the turntable begins to rotate.
• Set the tonearm lift to the up position and move the tonearm to the desired starting position. Under
insufficient lighting conditions use the target light for spotting the exact starting position.
• Set the tonearm lift to the down position and the tonearm slowly lowers to the record.
• Should you desire to stop the turntable without removing the tonearm from the record, simply press the
START/STOP-button.
• Should you desire to interrupt playback for a short period, set the tonearm lift to the up position. When you
wish to continue playback, set the tonearm lift back to the down position.
• When you do not need the tonearm lift at all, leave it in the down positon.
9. EXCHANGING THE PICK-UP SYSTEM
Loosen the tightening screws on the headshell and remove the connection-cables of the pick-up system.
Remove the old pick-up system from the Headshell.
Read the user manual of the new pick-up system.
Put the stylus cover on the stylus.
Connect the Headshell's connection cables with the terminals of the pickup-system and make sure that the
occupation of the cables is correct.
The different colours mean:
Used colour:
Channel and poles:
White (L+)
Left, plus-pole
Blue (L-)
Left, minus-pole
Red (R+)
Right, plus-pole
Green (L-)
Right, minus-pole
Tighten the screws on the Headshell.
Adjusting the overhang:
The overhang is the distance between the stylus and the center of the turntable.
For optimized pick-up, the overhang should be set to 10 mm.
Loosen the tightening screws on the headshell and move the system forwards or backwards until you reach
the desired position.
Make sure that you tighten the screws before you operate the device again.
CLEANING AND MAINTENANCE
We recommend a frequent cleaning of the device. Please use a soft lint-free and moistened cloth. Never use
alcohol or solvents!
DANGER TO LIFE!
Disconnect from mains before starting maintenance operation!
14
Publicité
