Golden Media Hypercube Mode D'emploi page 9

All manuals and user guides at all-guides.com
3.2 Language selection
Select your desired language with the Navigation-Buttons up and
down. Press the OK-Button to activate.
The starting wizard takes you through the basic setup of your STB.
Press the OK-Button on your remote control to get to the next
step.
You will be asked if you want to set the basic settings for your
STB now or if you want to quit the start wizard.
Use the Navigation-Buttons up and down to select your desired
option and press the OK-Button to activate your selection.
If you choose "User wizard to setup basic features" you will be
taken to the menu for the tuner configuration.
3.3 Tuner setup
Detailed information about the tuner setup can be found in
chapter 12.1 DVB-S Tuner configuration.
3.4 Default services list/Service scan
Depending on your tuner configuration in the previous step, you might be offered to install default services lists.
Otherwise you will be asked to perform a service scan. Detailed information about the service scan can be
found in chapter 12.2 Automatic scan.
9