Golden Media Hypercube Mode D'emploi page 20

All manuals and user guides at all-guides.com
If you have selected white list under the "Parental control type" then this channel will be the only one that can be
viewed without entering the right pincode.
Protecting the parental lock setup
Additionally you have the option to protect the parental control
menu using a pincode.
Setting the "Protect setup" option to yes, you will only be able to
change parental control setting after you have entered the
correct pincode.
Once you entered the wrong pincode three times in a row you
have to wait 15 minutes before you can try again.
Note: You can use two different pincodes to protect the setup
and the service list.
7. Hard disk operation
7.1 Initialization
If no OSD menu is visible on your screen, press the Menu-Button
to open the main OSD menu. Navigate to the option "Setup" and
press the OK-Button to select.
1. Navigate to the option "System" and press the OK-Button. The
"System" menu will open up. Navigate to the option "Hard disk"
and press the OK-Button Navigate to the "Hard disk setup" option
and press the OK-Button.
Navigate to the desired HDD option and press the OK-Button.
If you have installed another hard disk, this option will differ from
the one depicted!
By pressing the red Options-Button you will initialize (format) the
hard disk. After you confirm the safety question the initialization
process starts.
WARNING: All data stored on the HDD will be lost.
20