Golden Media Hypercube Mode D'emploi page 11

All manuals and user guides at all-guides.com
4.2 Service selection
Pressing the Left/Right-Buttons on your STB remote control will take you to the previous or next service.
Pressing the 0 on the Numeric-Keypad will enable you to skip back and forth between the two most recently
watched services. This feature is quite useful during commercial
breaks since it enables you to watch another channel and quickly
check if your movie is back on.
Using the Navigation-Buttons left/right you can switch to the 20
last viewed services.
4.3 Changing channel using the service list
Press the Up/Down-Buttons on your remote control to activate
the service list.
Use the Navigation-Buttons up/down to select the desired
service and press the OK-Button to change to the selected
service.
4.4 Controlling the volume
The Volume +/- Buttons controls the volume of the audio.
Pressing + will make turn it up and pressing - will turn it down.
Pressing the MUTE-Button mutes the volume. A crossed
speaker symbol will appear on the screen.
4.5 Changing the audio track
Pressing the Audio-Button in TV or Radio Mode will reveal the
"Audio" menu of the selected service.
Use the Navigation-Buttons up and down to move to desired
audio track. Press the OK-Button to select. The contents of this
menu will vary from service to service. Press the
Navigation-Buttons up and down to toggle AC3 downmix on and
off.
4.6 Sub Services
The green dot in the Infobar appears if the selected station transmits sub services.
Pressing the green Options-Button in TV or Radio mode will reveal the sub services menu.
11