Publicité
Step 18
å
Insert a SLIDE CAM (10A) into the LARGE DRAWER SIDES (D28 and D29).
å
Fasten the DRAWER SLIDES (35MC) to the LARGE DRAWER SIDES (D28 and D29). Use
four GOLD 5/16" FLAT HEAD SCREWS (3S) through holes #1 and #3.
å
NOTE: The screw head in the CAM must be visible through the slotted hole in the SLIDE.
å
Fasten a PULL (176K) to the LARGE DRAWER FRONT (R2). Use two SILVER 1/2"
MACHINE SCREW (38S).
å
Repeat this step for the other large drawer.
2
3
SILVER 1/2" MACHINE SCREW
(4 used for the PULLS)
www.sauder.com/services
Open end
1
R2
176K
38S
GOLD 5/16" FLAT HEAD SCREW
(8 used in this step)
Screw head - turn CAM to line up holes in
10A
the SLIDES with holes in DRAWER SIDES
D29
D28
3
3S
424127
Open end
1
2
10A
Page 23
Publicité
