Publicité
Step 23
å
To make adjustments to the drawers, loosen SCREW #3 in the SLIDES a 1/4 turn, then turn the
CAM clockwise or counter-clockwise. Notice how the drawer raises or lowers as you turn the CAM.
The higher the screw in the oblong hole, the higher your drawer front will be. The lower the screw,
the lower the drawer front. By adjusting the drawers this way, it will help the DRAWER FRONTS line
up better when closed. Tighten the SCREW when finished with adjustments.
å
NOTE: Please read the back pages of the instruction booklet for important safety information.
å
This completes assembly. Clean with your favorite furniture polish or a damp cloth. Wipe dry.
And to celebrate, why not share your success story?
Loosen screw #3 a 1/4 turn, turn the cam a 1/4 turn
maximum in both the clockwise and counter-clockwise
directions to make adjustments, and then tighten screw #3.
The higher the screw in the oblong hole,
the higher your drawer front will be. The
lower the screw, the lower the drawer front.
Page 28
Cam
424127
www.sauder.com/services
Publicité
