Comelit PLANUX MEMO VIDEO Mode D'emploi page 52

RESET CONFIGURATIONS
The function deletes all door entry monitor system
settings.
Access the menu Setup > Advanced > Reset
confi guration.
Thu 21/06/12 - 16:07 0W
Language
B
Confirm system
configuration reset?
B
Set date and time
Conditional commands
B
YES
Reset configuration Reset configuration
Confi rm by pressing the
CONFIGURATION UPDATE
The function updates all door entry monitor system
settings.
Access the menu Setup > Advanced > Update
confi gurations.
Thu 21/06/12 - 16:07 0W
Language
B
Confirm configuration update?
B
Set date and time
Conditional commands
B
YES
Reset configuration Reset configuration
Confi rm by pressing the
All manuals and user guides at all-guides.com
NO
YES
icon.
NO
YES
icon.
TRANSMISSION TIME
The transmission time determines the speed with which
the commands are sent over the data line.
The higher the value, the greater the time between
sending one command and the next.
E.g.: Supposing we have 5 lights in one area and we
send the switch-on command to all of them.
• If the value is set to 1, 1 tenth of a second will pass
between one light switching on and the next.
• If the value is set to 5, 5 tenths of a second will pass
between one light switching on and the next.
PRODUCT UPDATE
Please contact your installer or the Comelit Group S.p.A.
service centre for product software updates.
NUMBER OF TRANSMISSIONS
The number of transmissions is the number of
attempts made to send data over the line.
52
ADVANCED