Comelit PLANUX MEMO VIDEO Mode D'emploi page 51

ADVANCED
CALIBRATING THE TOUCH-SCREEN
If the touch-screen does not respond correctly to touch
commands, it can be calibrated.
Access the menu Setup > Advanced > Calibrate touch-
screen.
Thu 05/09/09 - 16:07 0W
Language
B
CONFIRM CALIBRATION
B
Set date and time
Conditional commands
B
YES
Reset configuration Reset configuration
Confi rm by pressing the
To calibrate the touch-screen, simply press and hold
the cross which appears in 3 different positions for 2
seconds.
Hold down for 2 seconds
All manuals and user guides at all-guides.com
NO
YES
icon.
SET INPUT
2 different functions can be assigned to the CFP-CFP
input on the bracket terminal board:
• Floor door call (CFP)
• Alarm function (a Simplebus alarm signal is sent to the
switchboard).
Access the menu Setup > Advanced > Set input.
Thu 21/06/12 - 16:07 0W
CFP function CFP function
Alarm function
Select the function by pressing the icon to the right of it.
TOTAL RESET
The function deletes all door entry monitor settings
implemented by the user, restoring the system to its
original default status.
Access the menu Setup > Advanced > Total reset.
Thu 05/09/09 - 16:07 0W
Language
B
Confirm user and system
configuration reset?
B Set date and time
Conditional commands
B
Reset configuration Reset configuration
Confi rm by pressing the
51
YES
NO
YES
icon.