Publicité
Les langues disponibles
Les langues disponibles
SETTING A MONITOR AS MAIN /
SECONDARY
Access the menu Setup > Advanced > Addresses >
Monitor.
Sat 05/09/09 16:07
Main
Main
Multiple main
Secondary
Select the setting by pressing the icon to the right of it.
Observe the limits specifi ed in the installation
diagrams in the Technical manual for Art. 20001001K
(code 2G40000849), and the Technical manual for
Art. 6214C (code 2G40000877 or technical sheet FT/
SBC/22).
All manuals and user guides at all-guides.com
SETTING A MULTIPLE ADDRESS
When the "Multiple address" function is activated, the
monitor will ring every time a Simplebus address within
the set range is called.
Access the menu Setup > Advanced > Addresses >
Multiple address.
1 Set the range start address.
2 Set the range end address.
SETTING THE INTERCOM ADDRESS
Access the menu Setup > Advanced > Addresses >
Intercom address.
Select the intercom address you wish to assign to the
monitor.
50
Thu 21/06/12 - 16:07 0W
Minimum address
Minimum address
Maximum address
Thu 21/06/12 - 16:07 0W
ADVANCED
1
2
Publicité
