GBC ShredMaster 7500S Mode D'emploi page 13

Symptom
Machine will not stop.
Machine stops.
Figure 19.
If none of the troubleshooting actions correct the problem, contact your local
dealer or call GBC National Service at 1-800-790-7787.
All manuals and user guides at all-guides.com
Unplug unit from electrical outlet.
Clean the auto sensing photo cell with a small
brush (not included). Figure 19.
Overload protection. Allow unit to cool down
approximately 5 to 10 minutes.
• Symbol flashes
• When symbol
ready for operation.
Corrective Action
stops flashing, machine is