Algam Lighting LIGHT192 Mode D'emploi page 20

CONTROL PANEL DESCRIPTION
4
FUNCTION
1 DMX OUT
2 DC INTPUT
3 POWER ON / OF
4 FIXTURES
5 SCENES
6 ECRAN LCD
7 BANK
8 CHASES
9 PROGRAM
10 MIDI/ADD
11 AUTO/DEL
12 MUSIC/BANK COPY
13 TAP SYNC/DISPLAY
14 BLACKOUT
15 FADE TIME SLIDERS
16 SPEED SLIDERS
17 PAGE SELECTOR
FADERS
18
1 2
5
18
DESCRIPTION
To send DMX signal to fi xtures or packs
To supply a DC 9~12V power, 300m A minimum
To turn on or off
To select any or all of 12 fi xtures
To store or run scenes
4- digit showing values and settings chosen
30 banks are available for selecting
To select 1-6 chases
To activate the program mode. Display blinks when activated
To control MIDI operation or activates save function
To select Auto run in chase mode or delete scenes and/or chases
To trigger sound activation in Chase mode or to copy a bank of scenes
from one to another in program mode
In Auto Chase mode used to change the rate of chase
and in program mode change LCD display value
Disables all channel outputs
To adjust the Fade Time. Fade Time is the time it takes the DMX Controller to comple-
tely change from one scene to another.
To adjust the rate of chase speed in Auto Mode
To select page A for channel 1 to 8, or page B for channel 9 to 16
To adjust the output level from 0-255 or the intensity from 0%-100% of each channel
3
6
17 16 15
P.20
7 8
9
10
11
12
13
14