cecotec TOAST&TASTE 2S Manuel D'instructions page 51

Note
You may notice a slight burning smell or smoke when using the toaster for the first time,
caused by the excess of lubricants from the manufacturing process. Ensure good ventilation
and let the toaster complete a few cycles until no odour or smoke can be noticed.
- After a short cooling down period, your toaster will be ready for use. The operation
instructions are detailed below.
3. OPERATION
1.
Plug the toaster into a power supply and introduce the bread loaves in the toaster's slots.
2. Turn the intensity level knob to the desired position.
3. Lower the lever, the toaster will start operating and the Stop button light will turn on.
4.
The toaster will eject the bread loaves and will turn automatically off when it has finished
toasting.
5. Use the extra-lift system to remove the smallest bread pieces.
Reheat function
- Use this function to reheat cold toasts.
- Introduce the toasts in the toaster and lower the lever. Press the Reheat button to select
this function.
Defrost function
Introduce the toasts in the toaster and lower the lever. Press the Defrost button to select this
function.
Stop function
To stop the toasting process at any time, press STOP.
Crumb-collecting tray
- The tray is designed to collect the breadcrumbs at the bottom of the device during the
toasting process.
- Press on the crumb-collecting tray to unlock it and to take it out.
- Empty it and then put it back in its position.
Stainless-steel tongs
Stainless steel tongs can be used to easily take out the toasted bread or to prepare
sandwiches.
ENGLISH
TOAST&TASTE 2S
51