Costway TQ10104 Mode D'emploi page 11

Attach the Left & Right Arm -1
1
5
4
3
2
3
Remove the Ø10 washers and Ø8
4
lock nuts on the hexagonal axle on
5
both sides of the carhead.
1. Attach the right arm to the hexagonal shaft on the right side of
the vehicle body.
2. Attach the left arm to the hexagonal shaft on the left side of the
vehicle body. Tip:The left and right arms must be assembled
horizontally and symmetrically. When assembling, insert the middle
axle and rotation axle into the corresponding holes of the left arm
at the same time.
3. Fit a Ø10 washer on each end of the hexagonal axle.
4. Tighten a Ø8 lock nut to each end of the hexagonal axle with two
socket wrenches.
5. Insert the arm hubcaps to the both arms.
11